The CT100 HS Spring Tester is High speed, High Resolution servo driven PC controlled spring tester

• Maximum Load Capacity: 100N (22.5lbf)
• Recommended minimum load: 0.8N (0.18lbf) *
• Minimum Load resolution: 0.002N (0.00045lbf
• Load Accuracy: ±0.0025N (0.000562lbf) at 0.5N (0.112lbf) and better than ±0.5N (±0.112lbf) at 100N (22.5lbf)
  (Better Than ISO 7500/1 Class 0.5)
• Standard Stroke 500mm (16")
• Standard Stroke resolution: 0.00025mm (0.00001"),
• Standard Stroke Accuracy: ±0.01mm (±0.00039”) for 500 stroke Accuracy: better than 0.005mm– Available with independent Calibration
• Platten Diameter: Ø55mm (2.17")
• Speed 0.03mm/s – 125mm/s (0.071”/min-295”/min). Accurately Controllable
• Footprint: 25x60cm (10"x23.6"),
• Weight 38kg (84lb)
• Power requirement: 100-240VAC, 3Amps 

* This recommended minimum load is the minimum load per ISO7500/1 where an accuracy of 0.5% can still be attained

View Data Sheet