USER INTERFACE AND PC

Fanless Industrial PC
Mini Computer,
Intel Core I7 4500U or better
Windows 10 or Windows11
2HDMI/2LAN/6COM RS232 / 4USB3.0 /4USB2.0 / 128G SSD
22” Monitor or better

Increase in Stroke to 1000 mm (40")

Stroke resolution 0.00025mm (0.00001")mm
Stroke accuracy: ±0.01mm (±0.00039”)

Conductive Free-length Module

Find the Spring Free-Length using an electric current and spring conductivity
More accurate and much quicker than the traditional Force method

Attach a PC and a Touchscreen to a tester

CT HS Series tester with attached PC and touch screen monitor

Or Select the built in PC / Monitor Model-SEE CTPC SERIES

Built in PC and touch screen monitor
-CTPC SERIES

Dimensional measurement software including 150mm Mitutoyo Caliper and PC hardware USB interface and cabling

Add dimensional measurement to Spring Force Data on a single combined report

Buckling Prevention Pins and Fixtures

Ø2, 4, 6 , 12mm Buckling Pin Set

LVA MODULE

A module designed to measure side loads, in plane and out of plane forces acting on a spring.
Vector analysis of the Spring Forces
Available for 500N models and larger

Forces Measured by LVA UNIT

Fn - Axial Vertical Forces measured on standard loadcells
SULx – Force in the X in-plane direction.
SULy – Force in the Y in-plane direction.
SULr – Resultant force in the XY plane.
SULrp – XY plane vector pierce point as a radius from the part center (polar coordinate).
SULƟp – XY plane angle to pierce point (polar coordinate – refer to SULrp).
SULxz – Angle of the force vector projected onto the XZ plane
SULyz – Angle of the force vector projected onto the YZ plane.

Optional Modules