The CT5000 Dual XXX Spring Tester is High speed,  High Resolution Servo driven PC controlled spring tester setup with a Dual Loadcell Configuration.

 XXX denotes the capacity of the Secondary Loadcell

• Maximum Load Capacity: 5000N (1125lbf)-Primary Loadcell
• Available Capacities for Secondary Loadcell:
  50N(11.25lbf), 100N(22.5lbf), 20 0N(45lbf), 500N (112lbf)
• Recommended minimum load for tester- Depends on Secondary Loadcell Capacity (See Table Below)
• Primary Loadcell Minimum Load resolution: 0.1N (0.022lbf)
• Primary Loadcell Load Accuracy: ±0.125N (0.028lbf) at 25N (5.6lbf) and better than ±25N (±5.6lbf) at 5000N (1112.5lbf) (Better Than ISO 7500/1 Class 0.5) 
  
• Secondary Loadcell Parameters:

• Standard Stroke 500mm (16")
• Standard Stroke resolution: 0.00025mm (0.00001"),
  
• Standard Stroke Accuracy: ±0.01mm (±0.00039”) for 500 stroke
• Accuracy: better than 0.005mm– Available with independent Calibration
• Primary Platten Diameter: Ø120mm (4.7")
• Secondary Platten Diameter: Ø55mm (2.17")
• Speed 0.03mm/s – 125mm/s (0.071”/min-295”/min). Accurately Controllable
• Footprint: 25x60cm (10"x23.6"), Weight 38kg (84lb)
• Power requirement: 100-240VAC, 3Amps
  * This recommended minimum load is the minimum load per ISO7500/1 where an accuracy of 0.5% can still be attained 
  

View Data Sheet