The CT10000 Dual XXX Spring Tester is High speed, High Resolution Servo driven PC controlled spring tester setup with a Dual Loadcell Configuration

 XXX denotes the capacity of the Secondary Loadcell

• Maximum Load Capacity: 10000N (2250lbf)-Primary Loadcell
• Available Capacities for Secondary Loadcell:
  100N(22.5lbf), 200N(45lbf), 500N (112lbf)
• Recommended minimum load for tester- Depends on Secondary Loadcell Capacity (See Table Below)
• Primary Loadcell Minimum Load resolution: 0.2N (0.044lbf)
• Primary Loadcell Load Accuracy: ±0.25N (0.056lbf) at 50N (11.2lbf) and better than ±50N (±11.2lbf) at 10000N (2250lbf) (Better Than ISO 7500/1 Class 0.5) 
  
• Secondary Loadcell Parameters:

• Standard Stroke 1000mm (40")
• Standard Stroke resolution: 0.0001mm (0.0000039"),
• Standard Stroke Accuracy: ±0.01mm (±0.00039”) for 1000mm(40”) stroke
• Accuracy: better than 0.005mm(0.000196”)– Available with independent Calibration
• Primary Platten Diameter: Ø200mm (7.87")
  
• Secondary Platten Diameter Ø 50mm(2.17”)
• Speed 0.03mm/s – 50mm/s (0.071”/min-120”/min). Accurately Controllable
• Footprint: 44x70cm (17.3"x27.5"), Weight 280kg (616lb) -FLOOR STANDING
• Power requirement: 100-240VAC, 16Amps
  * This recommended minimum load is the minimum load per ISO7500/1 where an accuracy of 0.5% can still be attained 
  

View Data Sheet