The CT100000 H Frame Tester is a High Capacity, High speed, High Resolution Servo driven PC controlled spring tester constructed with Quad Ballscrews.

• Maximum Load Capacity: 100000N (22500lbf)
• Recommended minimum load: 800N (180lbf) *
• Minimum Load resolution: 2N (0.450lbf)
• Load Accuracy: ±2.50N (0.56lbf) at 500N (112lbf) and better than ±500N (±112lbf) at 100000N (22500lbf) (Better Than ISO 7500/1 Class 0.5)
• Standard Stroke 1000mm (40")
• Standard Stroke resolution: 0.0001mm (0.0000039"),
• Standard Stroke Accuracy: ±0.01mm (±0.00039”) for 1000mm(40”) stroke
• Accuracy: better than 0.005mm(0.000196”)– Available with independent Calibration
• Quad Ballscrew Construction for optimal stiffness
• Platten Diameter: Ø400mm (15.75")
• 3 Loadcells included for optimum stiffness and off-center loading capacity
• Speed 0.03mm/s – 30mm/s (0.071”/min-71”/min). Accurately Controllable
• Footprint: 80x60cm (31.50”x23.6"), 
• Weight 1200kg (2640lb) -FLOOR STANDING
• Power requirement: 3 Phase 360-480VAC, 20Amp 
  

* This recommended minimum load is the minimum load per ISO7500/1 where an accuracy of 0.5% can still be attained

View Data Sheet