The ALT500  Spring Tester is an Automated Modular spring tester

• General
  • Maximum Load Capacity: 500N (112.5lbf). Smaller Loadcells available
  • Maximum Spring Diameter: Ø28mm (1.1")
  • Maximum Spring Freelength: 75mm (3.0”)
  • Footprint: 68X50cm (26.8"x19.7"), Weight 100kg 220lb) (Not including bowl feeder or sorter bins)
  • Power requirement: 100-240VAC, 10Amps
  
  
• Load Testing
  • Maximum Load Capacity: 500N (112.5lbf). Smaller Loadcells available
  • Recommended minimum load: 4N (0. 9lbf) *
  • Minimum Load resolution: 0.01N (0.0022lbf)
  • Load Accuracy: ±0.0125N (0.0028lbf) at 2.5N (0.56lbf) and better than ±2.5N (±0.56lbf) at 500N (112.5lbf)
  (Better Than ISO 7500/1 Class 0.5)
  • Maximum Standard Stroke 200mm (8") (depends on bush height and test pin length)
  • Standard Stroke resolution: 0.00025mm (0.00001"),
  • Maximum Spring Diameter: Ø28mm (1.1")
  • Speed 0.03mm/s – 125mm/s (0.071”/min-295”/min). Accurately Controllable
  
  
• Setting
  • Maximum Servo Force: 2500N (550lbf). Can be divided between 3 stations
  • Standard Setting Stroke 200mm (8") (depends on bush height and test pin length)
  • Setting quantity programmable. Setting height programmable for servo setter
  • Setting to solid allowed for both Pnuematic and servo control setters
  
  
• Sorting
  • 3 Way pneumatic controlled sorters standard
  • For multi parameter testing, springs can only be sorted in 2 directions
  • 5 Way sorters and multi directional servo sorters optional
  
  

View Data Sheet