Increase in Stroke to 1500 mm (60")

stroke resolution 0.00025mm (0.00001")mm
stroke accuracy: ±0.02mm (±0.00078”)

Increase in Stroke to 2000 mm (80")

stroke resolution 0.00025mm (0.00001")mm
stroke accuracy: ±0.02mm (±0.00078”)

Conductive Free-length Module

Find the Spring Free-Length using an electric current and spring conductivity
More accurate and much quicker than the traditional Force method

Dimensional measurement software including 150mm Mitutoyo Caliper and PC hardware USB interface and cabling

Add dimensional measurement to Spring Force Data on a single combined report

Buckling Prevention Pins and Fixtures

• Ø6, 12, 18 , 25mm (1/4”, ½”, ¾” and1”) Buckling Pin Set

LVA MODULE

A module designed to measure side loads, in plane and out of plane forces acting on a spring.
Vector analysis of the Spring Forces
Available for 500N models and larger

Forces Measured by LVA UNIT

Fn - Axial Vertical Forces measured on standard loadcells
SULx – Force in the X in-plane direction.
SULy – Force in the Y in-plane direction.
SULr – Resultant force in the XY plane.
SULrp – XY plane vector pierce point as a radius from the part center (polar coordinate).
SULƟp – XY plane angle to pierce point (polar coordinate – refer to SULrp).
SULxz – Angle of the force vector projected onto the XZ plane
SULyz – Angle of the force vector projected onto the YZ plane.