CTMS Series (Manual Testers) PC Models
CTMS-10PC
The CTMS-10PC spring tester is a programmable manual Compression/Extension Spring Tester. It is connected to a PC and is capable of producing Reports and performing SPC analyses. It has the following main characteristics:
- Extension and Compression Modes
- Load capacity: 10N
- Minimum resolution: 0.0002N
- Accuracy: ±0.0005N at 0.10N and better than ±0.05N at 10N. (ISO 7500/1 Class 0.5)
- Standard Stroke 200mm
- Platten Diameter: Ø55mm
- You can download the full data sheet here
CTMS-50PC
The CTMS-50PC spring tester is a programmable manual Compression/Extension Spring Tester. It is connected to a PC and is capable of producing Reports and performing SPC analyses. It has the following main characteristics:
- Extension and Compression Modes
- Load capacity: 50N
- Minimum resolution: 0.001N
- Accuracy: ±0.0025N at 0.50N and better than ±0.25N at 50N.
- Standard Stroke 200mm
- Platten Diameter: Ø55mm
- You can download the full data sheet here
CTMS-100PC
The CTMS-100PC spring tester is a programmable manual Compression/Extension Spring Tester. It is connected to a PC and is capable of producing Reports and performing SPC analyses. It has the following main characteristics:
- Extension and Compression Modes
- Load capacity: 100N
- Minimum resolution: 0.002N
- Accuracy: ±0.005N at 1N and better than ±0.5N at 100N.
- Standard Stroke 200mm
- Platten Diameter: Ø55mm
- You can download the full data sheet here
CTMS-200PC
The CTMS-200PC spring tester is a programmable manual Compression/Extension Spring Tester. It is connected to a PC and is capable of producing Reports and performing SPC analyses. It has the following main characteristics:
- Extension and Compression Modes
- Load capacity: 200N
- Minimum resolution: 0.004N
- Accuracy: ±0.010N at 2N and better than ±1.0N at 200N.
- Standard Stroke 200mm
- Platten Diameter: Ø55mm
- You can download the full data sheet here
CTMS-500PC
The CTMS-500PC spring tester is a programmable manual Compression/Extension Spring Tester. It is connected to a PC and is capable of producing Reports and performing SPC analyses. It has the following main characteristics:
- Extension and Compression Modes
- Load capacity: 500N
- Minimum resolution: 0.010N
- Accuracy: ±0.025N at 5N and better than ±2.5N at 500N.
- Standard Stroke 200mm
- Platten Diameter: Ø55mm
- You can download the full data sheet here
CTMS-2000PC
The CTMS-2000PC spring tester is a programmable manual Compression/Extension Spring Tester. It is connected to a PC and is capable of producing Reports and performing SPC analyses. It has the following main characteristics:
- Extension and Compression Modes
- Load capacity: 2000N
- Minimum resolution: 0.04N
- Accuracy: ±0.10N at 20N and better than ±10N at 2000N.
- Standard Stroke 200mm
- Platten Diameter: Ø55mm
- You can download the full data sheet here
CTMS-5000PC
The CTMS-5000PC spring tester is a programmable manual Compression/Extension Spring Tester. It is connected to a PC and is capable of producing Reports and performing SPC analyses. It has the following main characteristics:
- Extension and Compression Modes
- Load capacity: 5000N
- Minimum resolution: 0.10N
- Accuracy: ±0.25N at 50N and better than ±25N at 5000N.
- Standard Stroke 200mm
- Platten Diameter: Ø55mm
- You can download the full data sheet here
created with
WordPress Website Builder .