The CT200000 H Frame Tester is a High Capacity, High speed, High Resolution Servo driven PC controlled spring tester constructed with Quad Ballscrews.
-
Maximum Load Capacity: 200000N (45000lbf)
-
Recommended minimum load: 1600N (360lbf) *
-
Minimum Load resolution: 4N (0.900lbf)
-
Load Accuracy: ±5.00N (1.12lbf) at 1000N (224lbf) and better than ±1000N (±224lbf) at 200000N (45000lbf) (Better Than ISO 7500/1 Class 0.5)
-
Standard Stroke 1000mm (40")
-
Standard Stroke resolution: 0.00005mm (0.0000020"),
-
Standard Stroke Accuracy: ±0.01mm (±0.00039”) for 1000mm(40”) stroke
-
Accuracy: better than 0.005mm(0.000196”)– Available with independent Calibration
-
Quad Ballscrew Construction for optimal stiffness
-
Platten Diameter: Ø400mm (15.75")
-
3 Loadcells included for optimum stiffness and off-center loading capacity
-
Speed 0.03mm/s – 15mm/s (0.071”/min-36”/min). Accurately Controllable
-
Footprint: 80x60cm (31.50”x23.6"),
-
Weight 1400kg (3080lb) -FLOOR STANDING
-
Power requirement: 3 Phase 360-480VAC, 28Amp
* This recommended minimum load is the minimum load per ISO7500/1 where an accuracy of 0.5% can still be attained
View Data Sheet
